CDP and multi-vendor networks don't mix

The protocol is intended to enable communications between actual, physical neighbors and this is fine when there are Cisco switches involved that have CDP enabled. But because CDP operates at layer 2, (and is intercepted by Cisco switches), non-Cisco switches will pass these frames right along and never be the wiser. This creates an interesting situation where every CDP-device in the subnet can talk to each other. Unfortunately, they're not quite smart enough to realize they're not actually directly connected to each other.

As an example, lets say you have a router that's manually configured at full-duplex to a non-Cisco switch, and a bunch of IP phones that are connected at half-duplex to hubs downstream. The phones will broadcast their CDP advertisements and the router will generate log entries for every

Digg This!     StumbleUpon     Del.icio.us

RELATED CONTENT VoIP QoS and VoIP Security VoIP implementation study guide How will VoIP impact the quality of phone calls on our network? How does one cope with echo in a VoIP-enabled network? What's the best way to use an echo canceller? Does implementing VoIP security affect the QoS? How would one handle it, if it does? IBM, Avaya deals signal IP telephony quality control's coming of age Ensuring voice and video quality about more than watching packet flows Security concerns for enterprise Skype VoIP service selection: MPLS, VPLS or Metro Ethernet? Microsoft's Real-Time Codec (RTC) for VoIP optimization Disaster and recovery in the VoIP/IPT RFP VoIP Protocols SIP trunks a no-brainer for VoIP rollouts Digium's Asterisk PBX does God's work at Midwest church Microsoft's Real-Time Codec (RTC) for VoIP optimization Is there a difference between VoIP and IP telephony? VoIP for the globe-trotting frequent traveler SIP tutorial Springer Handbook of Speech Processing Top 10 VoIP tips for 2007 Push-to-talk implementation using SIP protocol IP PBX eases VoIP transition for gas company Unified Communications Tech Tip The significance of Avaya's Aura UC buyers should look for SaaS-based UC offerings in 2009 Using the iPhone in the enterprise? Social networking and discussion forums for the enterprise Streaming Cisco's IP Communicator to an HP thin client Demystifying unified communications deployment strategies Presence management and security Presence: SIMPLE versus XMPP Four factors driving videoconferencing Consider IBM Lotus SameTime for UC, not just Microsoft OCS

RELATED GLOSSARY TERMS Terms from Whatis.com − the technology online dictionary vishing  (SearchUnifiedCommunications.com)

RELATED RESOURCES 2020software.com, trial software downloads for accounting software, ERP software, CRM software and business software systems Search Bitpipe.com for the latest white papers and business webcasts Whatis.com, the online computer dictionary

CDP notice it receives, indicating it has a duplex mismatch, when in fact, it doesn't.

Another interesting consequence of a multi-vendor network is if you're trying to use an automated network management system. One of the interesting features of some of the newer systems is their ability to detect layer 2 devices (e.g. switches without IP addresses) using either ARP tables or CDP. In the case of a NMS using CDP with a non-Cisco switch (or a Cisco switch with CDP disabled, which permits the packets to pass without getting intercepted in addition to not generating its own CDP packets), it will draw a picture as if all the devices are directly connected, which of course, isn't true.

These sorts of issues are relatively minor in the grand scheme of things, but in a VoIP network, every little bit helps. On the other hand, if you don't have a Cisco switch, you can use this feature in the router to see all your phones. Simply type "show cdp neighbor detail" from the command prompt and you'll see a list of all the IP phones on the subnet, and some of their configuration.

Thomas Alexander Lancaster IV is a consultant and author with over ten years experience in the networking industry, focused on Internet infrastructure.

Rate this Tip To rate tips, you must be a member of SearchUnifiedCommunications.com. Register now to start rating these tips. Log in if you are already a member. DISCLAIMER: Our Tips Exchange is a forum for you to share technical advice and expertise with your peers and to learn from other enterprise IT professionals. TechTarget provides the infrastructure to facilitate this sharing of information. However, we cannot guarantee the accuracy or validity of the material submitted. You agree that your use of the Ask The Expert services and your reliance on any questions, answers, information or other materials received through this Web site is at your own risk.